-
1. Re: Use of the Cypress Microsoft Certified USB UART Driver
user_37207811 Jan 20, 2014 5:35 AM (in response to garimag_91)These was exactly what I needed. Than you so much.
-
2. Re: Use of the Cypress Microsoft Certified USB UART Driver
garimag_91 Apr 29, 2014 4:10 AM (in response to garimag_91)Hey Everyone,
I saw that for Windows 8 and Windows 8.1 you cannot use the PID 0003 for the USB-UART example project for PSoC. It will be good if you use the PID as 0008 instead and follow the steps given abvove to bind your device.
Also, do remember that these drivers can be used just for developmental purposes, you will need to get your own driver signature and buy your PID to be able to produce and distribute the product.
Cheers.!!!
-
3. Re: Use of the Cypress Microsoft Certified USB UART Driver
atif.abdulhady Jun 12, 2014 6:22 PM (in response to garimag_91)Hi everyone,
I've encountered a similar problem to this that my driver wont be updated with the .inf files generated with the project.
I found two .inf files in different folders inside the project folder the first is at Generated_Source\PSoC3\USBFS_cdc.inf and the second at codegentemp\USBFS_cdc.inf. I tried assigning both folders and get nothing. what could i do ?
maxdamage,
-
4. Re: Use of the Cypress Microsoft Certified USB UART Driver
content.librarian Mar 30, 2015 5:30 PM (in response to garimag_91)I'm using the PSoC 5 for development hardware. We cannot get Win7 to recognize the USBUART on a new machine. I tried the following (and many other installs) with no success:
Per http://www.cypress.com/?id=4143&rtID=119
- Downloaded Microsoft Certified USB UART Driver: http://www.cypress.com/?rID=63794
- Installed CypressDriverInstaller.exe
- Read and followed Use of the Cypress Microsoft Certified USB UART Driver http://www.cypress.com/?app=forum&id=2232&rID=89607
- Device manager > USBUART > Properties > Update Driver > Browse for driver software on your computer
- C:\Program Files (x86)\Cypress\Cypress USB-Serial Driver\DriverBinary\CDC_Driver\bin\win7\x64
- => Windows was unable to instlal your USBUART
- C:\Program Files (x86)\Cypress\Cypress USB-Serial Driver\DriverBinary\CDC_Driver\bin\win7\x86
- => Windows was unable to instlal your USBUART
I'm getting the impression that I am not even close to the solution or using the Microsoft Certified USB UART Driver for what it was intended.
Could you steer me in the right direction?
- Downloaded Microsoft Certified USB UART Driver: http://www.cypress.com/?rID=63794
-
5. Re: Use of the Cypress Microsoft Certified USB UART Driver
user_14586677 Mar 30, 2015 6:12 PM (in response to garimag_91)I am aware of these two driver sites -
http://www.cypress.com/?rID=63794 www.cypress.com/
http://www.cypress.com/?rID=57990 www.cypress.com/
Regards, Dana.
-
6. Re: Use of the Cypress Microsoft Certified USB UART Driver
HimaM_31 Mar 31, 2015 12:12 AM (in response to garimag_91)Hello,
Are you facing the issue when pointing to the .inf file in the Project Generated folder also or only with the Microsoft certified Cypress drivers?
Thanks,
Hima