- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I'm try porting STM32F2xx USB function to wiced 311
and use STM32CubeMX get USB-HID sample code
but ,It's not work
anyone can help me?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Wiced SDK development boards do not have USB connection from the host MCU and there is no sample app and Wiced APIs to support it.
Seyhan
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Is it possible to share your project? You can send me directly if you like.
Seyhan
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Looks like the external oscillator is used in your hardware and please check your external oscillator source "GLOBAL_DEFINES += HSE_VALUE=26000000" in platforms/xxx.mk makefile. Make sure it matches your hardware.
Clock setup is done in platform_config.h, perhaps your clock setup causing the expected delays and timeouts not to work as expected. The "#define PLL_M_CONSTANT ( 16 )" needs to be checked with your external oscillator definition.
The clock setup help from ST may help you to identify these key values, http://www.st.com/st-web-ui/static/active/en/st_prod_software_internet/resource/technical/software/u...
Seyhan
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Have you had any luck porting USB functionality to WICED?
I'm looking at adding getting USB running on a custom PCB with a STM32F427 MCU. It seems to be a quite large task?