Can I know the exact application ? This will help me to use suggest you the kits. However, for starters, you require PSoC Designer to make your project and write your code. I suggest you to download the latest software available at http://www.cypress.com/?rID=41083. This will ask you to download PSoC Programmer too. As far as kits are concerned, if you have your board ready, you will just be needing the Miniprog-1 available at http://www.cypress.com/?rID=37459 to program your board.
Happy PSoCing !
Good morning everyone. I have to program a device with a programmer CYC8C21334 Flash Runner, using a .hex file that I firstly used before with a MiniProg. Once connected to the PC via serial port I have to create the image file using the "Create FlashRunner Binary Format (. FRB)." The application then asks me to specify an offset, that I do not know. How do I read it from the .hex file? Again, the "Unused Bytes", are Don't care, 00h, FFh or User? Many thanks to those who can provide me with some support
Immagine.JPG 203.9 K