- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
I am working on to design schematic to build proto boards using WICED WIFI modules. I am bit stuck on to decide what is needed for programming the module. If anybody has suggestion, please provide. I would like to know how to debug the final boards (using emulator or something) and what facility should be provided on the board.
Basavaraj
- Labels:
-
Debug
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
You just need a J-Tag debugger to download the software and start debugging.
Olimex ARM-USB-TINY-H or Segger J-Tag debugger would work fine. A 10 pin header (2x5) is needed to connect the J-Tag debugger. Please check the evaluation board schematics for how to connect J-Tag debugger to your board.
Example schematics could be found in the SDK. Each released evaluation platform has a schematics directory where the schematics are located.
Seyhan
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
If you use WiConnect, you really only need a serial port as your host micro doesn't need to know much about Wi-Fi at all. In that case, your micro really just configures the module through a simple API.
see here: http://wiconnect.ack.me