Anonymous
Not applicable
Mar 31, 2010
12:10 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Mar 31, 2010
12:10 AM
Can I use just an USB port connected directly to a PSoC 5 chip to use the bootloader/send a bootloader file from PSoCDesigner/Express?
CD.
CD.
Labels
- Labels:
-
PSoC 3
1 Reply
Mar 31, 2010
05:58 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Mar 31, 2010
05:58 AM
Check out the below forum thread on bootloader for PSoC3. PSoC5 also supports the I2C bootloader. USB support is not yet available.
http://www.cypress.com/forums/...readid=9746&forumid=1
However, there is an errata for PSoC5 bootloader. The PSoC5 bootloader only works at 400KHz I2C clock. It does not work at 50KHz and 100KHz clock speeds.
http://www.cypress.com/forums/...readid=9746&forumid=1
However, there is an errata for PSoC5 bootloader. The PSoC5 bootloader only works at 400KHz I2C clock. It does not work at 50KHz and 100KHz clock speeds.