- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
My project is to use a microcontroller in a device which can be controlled by the PC(windows) through usb, so the first requirement is to select a microcontroller which supports usb and based on 8051 core (PSoC-3). Also I have to write the .exe file (on PC) which will communicate with the microcontroller,recommended to use c++ or c as the programming language. So my question if you can help me with a ready made driver that can be used on the pc or integrated in the software to support communication with PSoC-3.I need also application notes on how to configure the PSoC-3 USB driver to be connected to the PC.
Thanks in advance
- Labels:
-
PSoC 3
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Please refer to the following links :
USB Interrupt Loopback Example - PSoC® 3 / PSoC 5
USBUART in PSoC® 3 / PSoC 5
USB Vendor Commands with PSoC® 3 and PSoC 5 - AN56377
PSoC® 3 / PSoC 5 USB HID Fundamentals - AN57473
PSoC® 3 / PSoC 5 USB HID Intermediate - AN58726
If you need anything more specific let us know.
Regards,
Udayan