3 Replies Latest reply on Feb 4, 2011 1:08 AM by kishorek_96

Hex (4x4) Keypad Driver

john.mcdowell Feb 4, 2011 1:08 AM

        The Hex (4x4) Keypad Driver will not build using PSoC Developer 5.0 (SP2) and PSoC Developer 5.0 (SP3) while developing at the System Level. But it will build with PSoC Developer 5.0 (SP1)

What happens is when you try and Generate/Build a current project it fails to either auto assign pins for you or fails to allow you to assign pins.

1. Re: Hex (4x4) Keypad Driver

ganesh.raaja.maharajan Feb 26, 2009 6:16 PM (in response to john.mcdowell)

        I have informed about this bug to the PSoC Express team. I will try to find if we can get some workaround for this.

Best Regards,
Ganesh
Like Show 0 Likes(0)

Actions
2. Re: Hex (4x4) Keypad Driver

camilo.muoz.santacruz Jan 22, 2011 9:56 AM (in response to john.mcdowell)

HI.

I'm finishing my tesis and I need the code of a keypad using C not Assembler... Can you help me??.. I appreciated any assitance..

thanks
Like Show 0 Likes(0)

Actions
3. Re: Hex (4x4) Keypad Driver

kishorek_96 Feb 4, 2011 1:08 AM (in response to john.mcdowell)

Hi,



We are no more supporting System Level Designs in PSoC Designer. Could you please confirm me whether you are using System level design or Chip level design?


Regards,

Kishore.
Like Show 0 Likes(0)

Actions

Go to original post