- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello all,
I've been attempting to program a CY8C3866AXI-040 ES1 which was provided with a preliminary CY8CKIT-001 REV5 PSoC development kit, and seem to have hit a dead end.
The ES1 Device Revision is not selectable in PSoC Creator 1.0, and reports the following error when trying to program:
"The selected debug target 'CY8C3866AXA-040 ES1' is not compatible with the project's selected device 'CY8C3866AXI-040 ES2'"
I'm aware that the chip is being detected as "AXA" instead of "AXI", but selecting an "AXA" device for the project met with no success.
Is there anyway to get around this error? My understanding is that the ES1 run is not supported, per the following link: http://www.cypress.com/?app=forum&id=2492&rID=45962
Any help would be appreciated.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
That's an obsolete piece of silicon. Please email your contact details to creator_comforts@cypress.com and I'll see to it that we get you a new module with production silicon on it.
There's no charge but I will ask you to blend the old one...!
-- mgs