- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Anyone may help me with the follow doubt:
It Is possible to use the CY7C68013A with Winusb generic driver?
If it is possibe, how have I to proceed to load the firmware for the device?
Thanks a lot,
Ricardo.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
-- it is possible if your boards VIP and PID matches the driver.
if you could provide more details it whould be easier to answer
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Is is possible, unless you need ISO transfers. WinUSB handles only bulk and interrupt transfers. But für this the WinUSB is very easy to use, fast and stable. And WinUSB driver is pre-signed by Microsoft, so there is no problem to use the driver with Vista/7 x64 even without going the Winqual way.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
WinUSB or any generic driver for that matter should be able to work with FX2LP since it is a generic USB device.
For firmware download you have to A0 vendor request and load the firmware to FX2LP. The format of A0 vendor request to be used is clearly documented in the TRM.
Regards,
Anand