Problem with programming of CY8C3866AXI

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
lock attach
Attachments are accessible only for community members.
Anonymous
Not applicable

 hi, 

   

I am trying to porgramm CY8C3866AXI based board. I have followed following procedure

   

- Connected PSOC Miniprog3 to our board using 10pin connector

   

- Opened PSOC programmer 3.12.5

   

- I am able to see miniprog3 detected y PSOC programmer. But as I tried to select CY8C38 family, I observed that there is no any such item in drop down list.

   

- PFA screenshot. 

0 Likes
2 Replies
MaOs_298816
Level 1
Level 1
        Hi, Programming Protcol select JTAG or SWD.   
0 Likes
Anonymous
Not applicable

PSoC 3 can be programmed using SWD and JTAG protocols. To program CY8C3866AXI please select, SWD or JTAG as the programming protocol in the PSoC Programmer GUI. Then the relevant PSoC3/PSoC5 part numbers will appear in the dropdown menu.

0 Likes