Attachments are accessible only for community members.
Anonymous
Not applicable
Jun 24, 2011
05:43 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jun 24, 2011
05:43 AM
hi,
I am trying to porgramm CY8C3866AXI based board. I have followed following procedure
- Connected PSOC Miniprog3 to our board using 10pin connector
- Opened PSOC programmer 3.12.5
- I am able to see miniprog3 detected y PSOC programmer. But as I tried to select CY8C38 family, I observed that there is no any such item in drop down list.
- PFA screenshot.
Labels
- Labels:
-
PSoC 3
2 Replies
Jun 24, 2011
08:00 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jun 24, 2011
08:00 AM
Hi, Programming Protcol select JTAG or SWD.
Anonymous
Not applicable
Jun 29, 2011
01:46 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jun 29, 2011
01:46 AM
PSoC 3 can be programmed using SWD and JTAG protocols. To program CY8C3866AXI please select, SWD or JTAG as the programming protocol in the PSoC Programmer GUI. Then the relevant PSoC3/PSoC5 part numbers will appear in the dropdown menu.