- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
I'd like to implement three bandpass filters with the CY8CKIT-001 PSOC DEVELOPMENT Kit. I read some information about PSoc filters into the forum and I read the AN2099 application note too, but I'm still not sure that they can be implemented and how would can I do it.
The filter's characteristics are:
Filter1: Fs=105Hz Fi=45Hz B=60Hz Fr=68,7Hz Q=1,14
Filter2: Fs=145Hz Fi=65Hz B=80Hz Fr=97Hz Q=1,21
Filter3: Fs=8Hz Fi=0,5Hz B=7,5Hz Fr=2Hz Q=0,26
If it is really possible to implement these kind of filters, what would be the best method, using DBF blocks, SC/CT o FIR filters?.
Best regards,
Antonio M.
- Labels:
-
PSoC 3
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks U2!!.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Antonio,
I've read your post since I am also interested in these issue.
I am not completely sure that it's possible implement these three filters. As far as I know, you are allowed to implement only one DFB in one design. PSoC Creator doesn't handle more than one DBF... On the other hand each DFB dispose of 2 Channels independently treated.
Regards