- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
we have a FX3 board with a 16 bits interface to an image sensor.
For now, we're not able to correctly link the data from the device into FX3 via DMA transfers. There is no DMA notification nor transfer.
I guess the GPIF interface definition is not correct or maybe the socket connection. I use ones from the slave fifo sync interface adapted to our hardware. This doesn't work for now.
I've created a related case and it seems that it exists an UVC modified firmware with such an image sensor interface. I've downloaded latest available SDK but cannot find this firmware example.
So I wonder how to get an example (either slave fifo sync or UVC based) with data incoming from an external device, such as it seems to be defined in this "modified" UVC example.
Thank you for your help,
Best Regards.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
There must be a UVC folder after the installation with the firmware. Please check.
Regards,
Anand
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
UVC folder with internal memory example : YES.
UVC files with external interface GPIF definitions example : NO.
Could you post the latest example to check ?
thank you for your help
Best Regards.