- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have a custom board which has HCI_TX, HCI_TX, GND and VDD pins. How do I see the trace output using these pins (I use a FTDI USB to TTL adapter) for debugging? What configuration changes/initializations do I need to do?
Solved! Go to Solution.
- Labels:
-
Debug
-
Manufacturing and Test
-
SDK 2.X
- Tags:
- debugging
- debugtrace
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello sambhav,
I don't know how your custom board is configured, but here is an example from an example board with switch settings:
JLINK is a debugger that we use but you need to switch BCM_RX and BCM_TX from the chip to the HCI config.
Thanks
JT
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello sambhav,
I don't know how your custom board is configured, but here is an example from an example board with switch settings:
JLINK is a debugger that we use but you need to switch BCM_RX and BCM_TX from the chip to the HCI config.
Thanks
JT