I´am using PSoC Programmer Version 18.104.22.1685 and MiniProg3 to program some different Cypress-devices (for example CY21534).
The adjustment is:
Programming Mode: Power Cycle
I´ve a (made myself) universal "black box" with a 37pin-cable connection to my device (test-Vcc 3V3 or test-Vcc 5V, 8 ADC, 32 DI/DO, ... and the Miniprog3). The cable length is round about 20 inch. It´s not possible to abrigde the cable, because the "black box" is used for several products, for manuel test, for automated test with a robot, ...
Is it possible to program without problems with a cable length 20 inch or more?
If not, is it possible to modify the MiniProg3?