Emulation fail with TI xHCI (error code 10)

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

 I am using FX3 to connect with both TI & NEC xHCI, FX3 works fine with NEC, but can't even emulate with TI.  But TI xHCI works fine with USB3 Disk. anyone has this situation before?

   

 

   

Board Info--

   

UTB242 (uptech), USB 3.0 4-Port

   

 

   

TI (VEN_104C & DEV_824)---

   

Driver ver 1.6.2.0
Driver date 2011/1/14

   

 

   

 

   

NEC(VEN_1033 & DEV_0194)---

   

Driver ver 1.0.20.0
Driver date 2010/3/23

0 Likes
3 Replies
Anonymous
Not applicable

I couldn't find that board (UTB242) on the TI's website.

   

Please update the host driver and try again.

   

I have tested with the TI's PCIe based USB3.0 host controller add on board and It enummerates without any issues.

   

Thanks,

   

sai krishna.

   

 

0 Likes
Anonymous
Not applicable

 Thank you for your help, i have updated the drier to 1.12.18, and emulation work just fine.

0 Likes
Anonymous
Not applicable

 Good to hear that. 🙂

0 Likes