PSoC cator

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

If we are doing a project regarding Temperature Sensing which version of Creator would be more helpful ??

   

PSOC2.1 or PSoC2.0 ?

   

Are there Application notes available regarding Creator version2.0

0 Likes
5 Replies
ETRO_SSN583
Level 9
Level 9
250 likes received 100 sign-ins 5 likes given

Generally speaking always use the latest revision of Creator IDE,

   

as each release is comprised of bug fixes and enhancements.

   

In so far as temperature measurement the following is an apnote

   

 

   

http://www.cypress.com/?rID=49052

   

http://www.cypress.com/?rID=42993

   

 

   

Regards, Dana

0 Likes
lock attach
Attachments are accessible only for community members.
ETRO_SSN583
Level 9
Level 9
250 likes received 100 sign-ins 5 likes given

The application note, AN66477, as you can see from the link, is under

   

review, and will be re-released soon. Attached is the prior version, use

   

with caution.

   

 

   

Regards, Dana.

0 Likes
Anonymous
Not applicable
0 Likes
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

... and when you consult your Cypress Update Manager, you'll see that there is a new version of Creator 2.2 which you may download and install. As an extra there is a new temperature sensing module.

   

 

   

Bob

0 Likes
ETRO_SSN583
Level 9
Level 9
250 likes received 100 sign-ins 5 likes given

If your sensor is "remote", meaning a long copper run, consider using

   

current based integrated sensors, like LM334. There are also sensors that can

   

compensate for series R effects, several manufactuerers, TI, ON....

   

 

   

Do not forget to make compliance calculations for the sensor based on length

   

of run, current, and Cu wire size.

   

 

   

 

   

Regards, Dana.

0 Likes