Info : [CyBridge] Start API initialization
Info : [CyBridge] Hardware initialization complete (1733 ms)
Info : Connected - KitProg3 CMSIS-DAP BULK-122017C900020400  FW Version  2.10.878
Info : Selected Device: CY8CPROTO-062-4343W-122017C900020400
Info : ** Probe-config: kit_CY8CPROTO-062-4343W.cfg
Info : Open On-Chip Debugger 0.10.0+dev-3.0.0.665 (2020-03-20-17:12)
Info : Licensed under GNU GPL v2
Info : For bug reports, read
Info : 	http://openocd.org/doc/doxygen/bugs.html
Info : debug_level: 2
Info : adapter speed: 1500 kHz
Info : serial:    122017C900020400
Info : transport: swd
Info : rst type:  soft
Info : efuse:     off
Info : sflash restrict: 0
Info : adapter speed: 2000 kHz
Info : ** Auto-acquire enabled, use "set ENABLE_ACQUIRE 0" to disable
Info : cortex_m reset_config sysresetreq
Info : cortex_m reset_config sysresetreq
Info : none separate
Info : SFlash programming disallowed, see 'sflash_restrictions' command
Info : tcl server disabled
Info : Listening on port 4445 for telnet connections
Info : CMSIS-DAP: SWD  Supported
Info : CMSIS-DAP: FW Version = 2.0.0
Info : CMSIS-DAP: Interface Initialised (SWD)
Info : SWCLK/TCK = 1 SWDIO/TMS = 1 TDI = 1 TDO = 1 nTRST = 0 nRESET = 1
Info : CMSIS-DAP: Interface ready
Info : KitProg3: FW version: 2.10.878
Info : KitProg3: Pipelined transfers enabled
Info : VTarget = 3.325 V
Info : kitprog3: acquiring PSoC device...
Error: kitprog3: failed to acquire PSoC device
Info : clock speed 2000 kHz
Info : SWD DPIDR 0x6ba02477
Info : SWD DPIDR 0x6ba02477
Error: Failed to read memory at 0xe000ed00
Info : Polling target psoc6.cpu.cm0 failed, trying to reexamine
Info : SWD DPIDR 0x6ba02477
Info : SWD DPIDR 0x6ba02477
Error: Failed to read memory at 0xe000ed00
Info : Examination failed, GDB will be halted. Polling again in 100ms
Info : Polling target psoc6.cpu.cm0 failed, trying to reexamine
Info : SWD DPIDR 0x6ba02477
Info : SWD DPIDR 0x6ba02477
Error: Failed to read memory at 0xe000ed00
Info : Examination failed, GDB will be halted. Polling again in 300ms
Info : Listening on port 3333 for gdb connections
Info : Listening on port 3334 for gdb connections
Info : accepting 'telnet' connection on tcp/4445
Info : Open On-Chip Debugger
Info : init_target
Info : ***************************************
Info : SWD DPIDR 0x6ba02477
Error: Failed to read memory at 0x16000000
Info : mem2array: Read @ 0x16000000, w=4, cnt=1, failed
Info : SWD DPIDR 0x6ba02477
Error: Failed to read memory at 0x16002004
Info : mem2array: Read @ 0x16002004, w=4, cnt=1, failed
Info : SWD DPIDR 0x6ba02477
Error: Failed to read memory at 0x402020c4
Info : mem2array: Read @ 0x402020c4, w=4, cnt=1, failed
Info : Error executing event examine-end on target psoc6.cpu.cm0:
Error: /Applications/CyProgrammer_3_0.app/Contents/MacOS/./../CyPGui/openocd/scripts/target/psoc6_common.cfg:278: Error: 
Error: in procedure 'init_target' 
Error: in procedure 'ocd_process_reset' 
Error: in procedure 'ocd_process_reset_inner' called at file "embedded:startup.tcl", line 270
Error: in procedure 'cy_get_set_device_param' called at file "/Applications/CyProgrammer_3_0.app/Contents/MacOS/./../CyPGui/openocd/scripts/target/psoc6_common.cfg", line 221
Error: in procedure 'show_chip_protection' called at file "/Applications/CyProgrammer_3_0.app/Contents/MacOS/./../CyPGui/openocd/scripts/target/cy_get_set_device_param.cfg", line 189
Error: in procedure 'mrw' called at file "/Applications/CyProgrammer_3_0.app/Contents/MacOS/./../CyPGui/openocd/scripts/target/cy_get_set_device_param.cfg", line 146
Error: at file "/Applications/CyProgrammer_3_0.app/Contents/MacOS/./../CyPGui/openocd/scripts/target/psoc6_common.cfg", line 278
Info : SWD DPIDR 0x6ba02477
Error: Failed to read memory at 0xe000ed00
Info : SWD DPIDR 0x6ba02477
Info : SWD DPIDR 0x6ba02477
Info : AP write error, reset will not halt
Info : SWD DPIDR 0x6ba02477
Info : SWD DPIDR 0x6ba02477
Error: in procedure 'init_target'
Info : SWD DPIDR 0x6ba02477
Info : Polling target psoc6.cpu.cm4 failed, trying to reexamine
Info : SWD DPIDR 0x6ba02477
Info : SWD DPIDR 0x6ba02477
Error: Failed to read memory at 0xe000ed00
Info : Examination failed, GDB will be halted. Polling again in 100ms
Error: cyp status: ERROR