Global Out Net routing restrictions

Version 1
    Question: Can I route different signals like two digital block outputs to same pins of two ports like P4[0] and P2[0]?



    Both P4[0] and P2[0] are connected to Global_Out_Even0 net.  As there cannot be two sources driving the same Global out net, it is not possible to route two different signals on these pins. For example, it is not possible to route a PWM output to P4[0] and UART TX output to P2[0].  Under such circumstances, select a different Global Output net for one of the signals and route it to a different pin.