In BYTE mode configuration, using the write buffer commands, what is the value for the word count in cycle-4? – KBA203365

Version: **

 

Question:

In BYTE mode configuration, using the write buffer commands, what is the value for the word count in cycle-4?

 

Answer:

In the S29GL-P datasheet notes, in BYTE (x8) mode, the total number of cycles may be from 6 to 69 (63-bytes).

In BYTE (x8) mode, there is a total of 64-bytes.  Therefore any number of write cycles from 1 to 64 will suffice.

Note:  the word count is actually the write count minus 1. For example, if the word count is 32, the write count to be entered in cycle-4     is 31.