Default I2C Device Address for Scratchpad and PLL EEPROM Blocks
- Subscribe to RSS Feed
- Mark as New
- Mark as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report Inappropriate Content
Answer:
The default I2C addresses are as follows:
Scratchpad EE block 1: 1000000
Scratchpad EE block 2: 1000001
Scratchpad EE block 3: 1000010
Scratchpad EE block 4: 1000011
Scratchpad EE block 5: 1000100
Scratchpad EE block 6: 1000101
Scratchpad EE block 7: 1000110
Scratchpad EE block 8: 1000111
PLL configuration EE block: 1101000
PLL configuration SRAM block: 1101001
CyberClocks ISR software will enable the user to change the 4 MSB's of the Scratchpad EE block device address, the 4 MSB's will be the same for all 8 blocks and the 3 LSB's count up from 000 to 111.
The 6 MSB's of the PLL configuration blocks can be modified to the users desired value and will be the same for the EE block and SRAM block. The LSB of the PLL configuration blocks differentiate the EE and SRAM block.
- Tags:
- clock generation
-
This widget could not be displayed.Anonymous