To program the Instaclock we have our new hardware programmer which is our CY36800. You can create a jedec file using CyClocksRT of the CyberClocks software and program the device using the CY36800 Titanium Programmer. You need to connect the Titanium Programmer to enable the Program Device button when you are ready to actually program with your configuration in CyberClocks. You can save your jedec file to progrm the part later or submit to one of our Authorized distributor or any of our authorized third party programming vendors. We have our General Purpose Clocks Third-Party Programmer List available on our website.
Hardware Programmer: CY36800.