eCERA - Crystal - 12MHz +/- 30ppm
- Subscribe to RSS Feed
- Mark as New
- Mark as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report Inappropriate Content
Answer:
Yes, the GF1200008 which is an HC49SMD crystal has been used in our CY3630 EVK modules. Please see data sheet below. There are also an alternatives package option.
A 12-MHz crystal (30-ppm or better) is directly connected between XTAL and GND without the need for external capacitors. A digital clock out function is provided, with selectable output frequencies of 0.75-, 1.5-, 3-, 6-, or 12-MHz. This output may be used to clock an external microcontroller (MCU) or ASIC. This output is enabled by default, but may be disabled. Below are the requirements for the crystal to be directly connected to XTAL pin and GND:
Nominal Frequency: 12 MHz
Operating Mode: Fundamental Mode
Resonance Mode: Parallel Resonant
Frequency Initial Stability: ?30 ppm
Series Resistance: <60 ohms
Load Capacitance: 10 pF
Drive Level: 10 ?W?100 ?W
- Tags:
- rf transceivers
-
This widget could not be displayed.Anonymous