Programming time for CY3207 ISSP programmer

Version 1
    Answer:

    Question: What is the difference in programming time for CY3207 ISSP programmer while using "In System" or "In socket" programming modes?

    Response: Programming time will not differ much in ISSP and Socket programming mode.
    Please find the below data for CY8C27443 (16K Flash) part number:

    Programmer Connected to PC

    1. Socket Programming:   ~14Sec
    2. ISSP Programming:
        Vdd Stable On:         ~14Sec
        Vdd Rising Edge(Supply should be provided after 4 Sec and before 20Sec): ~13Sec

    Stand Alone Mode(Not Connected to PC)

    1. Socket Programming: ~13Sec
    2. ISSP Programming:
       Vdd Stable On:  ~13Sec
       Vdd Rising Edge(Supply should be provided after 4 Sec and before 20Sec):   ~14Sec

    From the above data it is evident that irrespective of the mode of programming it takes about 13 to 14 seconds to program a 16K device.

    Also, programming time does not depend on the code size of the firmware but it depends on Flash size of device.

    Programming Time for CY8C29466:
    For 350 byte code—46 Sec
    For 5.6Kbyte code—46 Sec