Programming Times of the CY2XF24
Anonymous
Not applicable
Dec 29, 2009
11:33 PM
- Subscribe to RSS Feed
- Mark as New
- Mark as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report Inappropriate Content
Dec 29, 2009
11:33 PM
Question: How many times is CY2XF24 programmable?
Answer:
The CY2XF24 is a One Time Programmable (OTP) device and cannot be re-programmed after being programmed once.
The CY2XF24 has an I2C interface which can be used to change the output frequency, but this is different from "programming" because I2C changes are lost when power is removed. The I2C interface is not used to program or reprogram the device memory. The I2C is used for frequency margining where we change the settings already programmed as per the truth table.
Part numbers beginning with CY2XF24FLXC are field programmable devices. They are unprogrammed when shipped. The user may program them once, using a programmer such as the CY3675 CyClockMaker.
Part numbers beginning with CY2XF24LXC are factory programmed devices. They are programmed by Cypress prior to shipping, and cannot be reprogrammed afterwards.
- Tags:
- clock generation
Rate this article:
Contributors
-
This widget could not be displayed.Anonymous