Routing 32 KHz ILO output to pin in CY8C20xx6A

Version 1
    Question: Is it possible to route 32kHz ILO output to the pin in Cy8C20xx6A series of devices?



    CY8C20xx6A family of devices doesn't allow routing of digital signals to output pins due to the unavailability of digital interconnects. However, you can write to registers for routing the 32kHz clock to pins. OUT_P1 register is used to route the internal 32K clock to P1[6]. OUT_P0 register can be used to route the internal 32K clock to P0[4] but this output will not be available in sleep mode. Remember that you have to change the drive mode of these pins to strong. Please refer to Technical reference manual to know more about these registers.