The Minimal EEPROM C2 load code required for USB connectivity with PC for FX2LP18

Question: We are using the MoBL-USB FX2LP18 CY7C68053 device in our system, We are facing problem in establishing connection on the USB interface with the PC. Can you provide us with the minimal EEPROM C2 load code required for USB connectivity with PC?

 

Answer:

The attached LP_18_safe.iic EEPROM image can be to used to burn the EEPROM for making USB connectivity with PC . The LP_18_safe.iic EEPROM image contains simple firmware that connects the CY7C68053 device to USB and enumerates with the PID 0x8613 (identifies this as a generic FX2LP18 chip). The source code for this EEPROM image can be found in C:\Cypress\USB\Examples\FX2LP\Connect after you install setupFX2LP18_DVK_CY3687.zip from the link CY3687 MoBL-USB FX2LP18 Development Kit in the default location.