• Smart Thermostat

    This project was created by an extremely talented Cypress Employee: Alan Hawse (@iotexpert) who is the  Sr. VP of Solutions and Software at Cypress.   Project Technology Focuses PSoC 6 Arm® Cortex&#...
    MatthewS_51
    last modified by MatthewS_51
  • Basic Understanding of Power Electronic converters and their brief Application in USB controllers: Part 2

    The following topics were discussed in brief in Part1 of this blog, Basic Definition of Power electronics. Different Applications of Power electronics. Various power electronic converters and their applications. ...
    AbhilashP_31
    last modified by AbhilashP_31
  • 基于CX3的UVC摄像头应用学习笔记-七(添加其他分辨率)

         在本篇 blog 中,我们学习如何在固件中已有的分辨率基础上,添加新的分辨率。本篇 blog ,我们在上一篇 blog 的固件的基础上进行修改,所以用的硬件还是CX3      Denebola RDK。原固件中只定义了 1080P@30fps,此处我们增加 720P@60fps。   首先我们需要在描述符文件中添加相应...
    YangyangC_06
    last modified by YangyangC_06
  • 基于CX3的UVC摄像头应用学习笔记-五 (UVC 图像属性控制)

    在本篇blog中,我们学习如何在UVC 应用中实现对图像属性的控制。本篇笔记中应用到的 固件 为 第四篇笔记 的附件,硬件 为 CX3 Denebola 板。   从 UVC 1.5 协议上可以看到,亮度控制属于 processing unit的内容,必需支持的控制命令有 SET_CUR、GET_CUR、GET_MIN、GET_MAX、GET_RES、GET_INFO 和 GET_DEF。   首先,在...
    YangyangC_06
    last modified by YangyangC_06
  • 基于CX3的UVC摄像头应用学习笔记-三(固件调试-1)

    经过了第二篇笔记的学习,用户可以自行创建出一个支持视频流传输的UVC工程,其中 具体的 sensor/ISP 配置部分需要用户将获得的参数写入到工程框架中。但是,生成的工程下载到用户的硬件板中,并不是每次都能正确地出图。本篇笔记介绍在这种情况下,如何排查和解决这种问题。   从大的方面来讲,可以从硬件和软件(固件,下同)两个方面进行排查。   首先来讲硬件方面可能的原因。 USB 部分原理图设计。主要检查...
    YangyangC_06
    last modified by YangyangC_06
  • 基于CX3的UVC摄像头应用学习笔记-二(建立工程模板)

    根据 基于CX3的UVC摄像头应用学习笔记-一(CX3 简介) ,用户可以选择一款适用于CX3的Image sensor 或者 Image ISP。本篇文章讨论如何利用 EZ-USB SDK 内置的CX3配置工具生成新的工程模板。   CX3 配置向导是一个图形化的工具,用户不需要写任何代码,即可从0开始建立一个可用的UVC工程。下面介绍详细的步骤。 在SDK中点击相应的图标,如下图所示。 在弹出的对话框中,选...
    YangyangC_06
    last modified by YangyangC_06
  • Interfacing OLED Display with PSoC 6 using ModusToolBox 2.1

    In this blog, we will see how we can interface an OLED display with a PSoC 6 device and add it to our application to make a simple standalone system. We developed a ModusToolbox application to interface a DHT-11 senso...
    RakshithM_16
    last modified by RakshithM_16
  • Session 5: Introduction to Low Power Modes in PSoC 6

    Welcome to the fifth session of the ModusToolbox Training Series!  In the previous session, Session 4: AnyCloud WIFI Design Flow, we learnt about AnyCloud WiFi Design Flow and how to build basic WiFi applications...
    RakshithM_16
    last modified by RakshithM_16
  • Interfacing DHT-11 with PSoC 6 using ModusToolBox 2.1

    In the previous blog, I shared the PSoC Creator projects to interface a PSoC 6 device with the DHT-11 sensor. The previous blog also covered details regarding the DHT-11 sensor and its working. In this blog, we will b...
    RakshithM_16
    last modified by RakshithM_16
  • Mbed OS 5.14 released with PSoC 64 Secure MCU Support

    Arm announced a release of Mbed OS today - version 5.14 - and also announced that "engineering focus has shifted from feature development toward feature refinement and optimizations that will improve your developer ex...
    MarkS_11
    last modified by MarkS_11
  • Getting Started with PSoC 6 and CYW43xxx in Mbed OS

    Cypress development kits based on PSoC 6 MCU and CYW43xxx WiFi/BT combo devices (CYW43012, CYW4343W) can be used for developing Mbed OS Applications.   PSoC 6 MCU: PSoC 6 MCU bridges the gap between expensive, p...
    VivekK_11
    last modified by VivekK_11
  • Second Chance to Watch Alan Hawse' Bluetooth Mesh Virtual Workshop

    We had a really successful workshop on Wednesday this week. Plenty of people attended and Alan kept them all engaged with his knowledge, humor, and famous dancing skills. He programmed a bunch of Cypress CYBT-213043-M...
    MarkS_11
    last modified by MarkS_11
  • BLE Throughput Rate Benchmark Test for Cypress BT SoCs

    This blog has the details of benchmark test performed for BLE GATT Throughput between Cypress BT SoC CYW20820/CYW20721 and different Android and iPhones. The firmware used to perform the measurement is available on ...
    NidhiH_76
    last modified by NidhiH_76
  • Mbed part 2 - Importing a code example from the Cypress ModusToolbox code example GitHub repository

    Hey ModusToolbox users.  This blog post is a follow-up to the post I recently made showing a WiFi Scanner using the Mbed->ModusToolbox flow. While that was meant as an introduction, this post will actually be ...
    mattl_01
    last modified by mattl_01
  • Looking for Python on PSoC? Take a look at Zerynth

    I wrote about Zerynth just after the Embedded World show, where they gave a great demo of their Python virtual machine running an IoT demonstration on a PSoC Pioneer kit. Like all good demos it was, in essence, really...
    MarkS_11
    last modified by MarkS_11
  • Session 4: AnyCloud WIFI Design Flow

    Welcome to the fourth session of the ModusToolbox Training Series!   In the previous Session 3: Introduction to CapSense in ModusToolbox , we learnt about CapSense in ModusToolbox and how to built basic CapSense...
    AditiB_81
    last modified by AditiB_81
  • Session 1: Introduction to ModusToolbox 2.x

    ModusToolbox software is a set of multi-platform development tools and libraries that lets you create interesting applications on your favorite Cypress kits. Due to its vastness, understanding all the features and asp...
    DheerajK_81
    last modified by DheerajK_81
  • Session 2: Introduction to Digital Peripherals in ModusToolbox

    Welcome to the second session of the ModusToolbox Training Series!  In the last session, we set up ModusToolbox, got an overview of the software but we didn't exactly get our hands dirty by creating any applicat...
    DheerajK_81
    last modified by DheerajK_81
  • Session 3: Introduction to CapSense in ModusToolbox

    Welcome to the third session of the ModusToolbox Training Series!  In the previous session, we learnt about Digital Peripherals on PSoC 6 and how you can interact with them using the HAL, the PDL, and the BSP. &#...
    BragadeeshV_41
    last modified by BragadeeshV_41
  • A workaround to solve "Some boards and apps may be missing" in ModusToolbox

    Note: This blog is DEPRECATED since ModusToolbox offline content package is provided. Read this blog for reference purpose only.   --------------------------------------------------------------------------------...
    ChunleiL_51
    last modified by ChunleiL_51