• CCG3PA Resistor Divider Network in Direct Feedback: Design Guidelines - KBA31220

    Author: YiZ_31           Version: **   In direct feedback applications, CCG3PA uses an IDAC connected to the Feedback pin of DC-to-DC to control the converter’s ...
    ChaitanyaV_61
    last modified by ChaitanyaV_61
  • CYW20706 as a Peripheral Device: Multi-connection Support - KBA229331

    Version: **   CYW20706 can support multi-connection as a Peripheral device. To realize the multi-connection functionality, you need to restart advertising after a connection is established with a Central device. ...
    ChaitanyaV_61
    last modified by ChaitanyaV_61
  • 增加低功耗蓝牙的数据传输速率 - KBA224929 (ZH)

    Version: ** 问题:如何增加两个低功耗蓝牙设备之间的数据传输速率?   答案: 一般情况下,低功耗蓝牙的数据传输速率和ATT_MTU,连接间隔,链路层有效载荷(蓝牙4.2版本的链路层有效载荷LL_Payload=251),物理层的数据传输速率(蓝牙5.0版本支持2 Mbps)有关。为了提高低功耗蓝牙的传输速率,请尝试优化这四个参数。 蓝牙4.2版本PHY层仅支持1 Mbps的数据传输,蓝牙5.0的PHY层支...
    ChaitanyaV_61
    last modified by ChaitanyaV_61
  • OTA2 Reliability for Battery-operated Wireless Devices - KBA231150

    Version: **   To guarantee a reliable OTA2 operation for battery-operated wireless devices such as CYW43907 and CYW54907, it is recommended to check the battery level before executing the OTA2 extract operation. ...
    ChaitanyaV_61
    last modified by ChaitanyaV_61
  • 蓝牙连接过程中的PIN码设置 - KBA225063 (ZH)

    Version: **   在通过配对过程建立连接密钥的过程中,可以使用蓝牙PIN码来进行设备之间的相互认证。在配对过程中,可以使用PIN码生成初始连接密钥。在与具有数字输入能力的设备连接时,可以在界面上输入PIN码。 本文通过一个例程介绍了如何设置PIN码。另外还附了一个基于SPP的例程。   下载附件,将其解压缩,然后将btm_init.h文件复制到您的项目中。  在WICED®...
    ChaitanyaV_61
    last modified by ChaitanyaV_61
  • Sequence to Disable I2C Module After Transmission for FCR4 MCUs - KBA211486

    Version: **   Translation - Japanese: FCR4 MCUの送信後にI2Cモジュールを無効にするシーケンス - KBA211486 - Community Translated (JA)   Question: What is the right way to disable the I2C module after the I2C transmission is c...
    PraveenM_86
    last modified by PraveenM_86
  • EZ-BLE™ PSoC™評価ボード(CYBLE-014008-EVAL) と BLEパイオニアキット(CY8CKIT-042-BLE) とのピンマッピングの違い - KBA03804 - - Community Translated (JA)

    Community Translated by  KoKi_1693136        Version: **   Translation - English: Pin Mapping Differences Between the EZ-BLE™ PSoC™ Evaluation Board (CYBLE-014008-E...
    YukihiroS_51
    last modified by YukihiroS_51
  • PSoC®3、PSoC 4 Lシリーズ、およびPSoC 5LP USBデザインのトラブルシューティング –  KBA210620- Community Translated (JA)

    Community Translated by NoTa_4591161NoTa_4591161         Version: *B   Translation - English: Troubleshooting PSoC® 3, PSoC 4 L-Series, and PSoC 5LP USB Designs – KB...
    ShoichiS_76
    last modified by ShoichiS_76
  • 非同期メモリ製品のCY62147GとCY62146Gの違い – KBA219723 - Community Translated (JA)

    Community Translated by  MaMi_1205306      Version: **   Translation - English: Differences between CY62147G and CY62146G Asynchronous Memory Parts – KBA219723   質問: 非同期S...
    ShoichiS_76
    last modified by ShoichiS_76
  • デバイス インスタンス パスを使用した複数のUSBシリアル デバイスへのアクセス – KBA228257- Community Translated (JA)

    Community Translated by  YoOb_1790021          Version: **   Translation - English: Accessing Multiple USB-Serial Devices using the Device Instance Path – ...
    ShoichiS_76
    last modified by ShoichiS_76
  • タイトル:BLEデータレートの増加 - KBA224929 - Community Translated (JA)

    Community Translated by keni_4440091          Version: **   Translation - English: Increase BLE Data Rate - KBA224929   質問: 2つのBLEデバイス間でBluetooth Low Energy (BL...
    ShoichiS_76
    last modified by ShoichiS_76
  • FX3からのデータの読み取り中にDMAフラグが期待どおりに機能しない場合のデバッグ – KBA230545 - Community Translated (JA)

    Community Translated by NoTa_4591161         Version: **   Translation - English: Debugging when DMA Flags do not Work as Expected while Reading Data from FX3 – KBA23...
    SivaK_96
    last modified by SivaK_96
  • Debugging when DMA Flags do not Work as Expected while Reading Data from FX3 – KBA230545

    Author : HemanthR_06          Version: **   Translation - Japanese: FX3からのデータの読み取り中にDMAフラグが期待どおりに機能しない場合のデバッグ – KBA230545 - Community Translated (JA)   Questio...
    SivaK_96
    last modified by SivaK_96
  • SLRD/SLWR  Pins During GPIF Mode of FX2LP

    Translation - Japanese: FX2LPのGPIFモード中のSLRD / SLWRピン - Community Translated (JA)   Question: During GPIF burst transaction, is the GPIF in control of the SLWR, SLOE signals internally?  Do I need to tie th...
    SivaK_96
    last modified by SivaK_96
  • FX2LPのGPIFモード中のSLRD / SLWRピン - Community Translated (JA)

    Community Translated by NoTa_4591161         Version: **   Translation - English: SLRD/SLWR  Pins During GPIF Mode of FX2LP   質問: GPIFバーストトランザクション中、GPIFはSLWRを制御...
    SivaK_96
    last modified by SivaK_96
  • USB to Parallel Converter Using FX2LP

    Translation - Japanese: FX2LPを使用したUSB-パラレルコンバーター - Community Translated (JA)   Question: How can I use FX2LP to make an usb to parallel converter?  The data received over the USB should be made available o...
    SivaK_96
    last modified by SivaK_96
  • FX2LPを使用したUSB-パラレルコンバーター - Community Translated (JA)

    Community Translated by NoTa_4591161         Version: **   Translation - English: USB to Parallel Converter Using FX2LP   質問: FX2LPを使用してUSBパラレルコンバーターを作成するにはどうすればよいでし...
    SivaK_96
    last modified by SivaK_96
  • USB-to-Parallel Converter Using EZ-USB® FX2LP™ – KBA88219

    Version: **   Translation - Japanese: EZ-USB®FX2LP™を使用したUSB-パラレルコンバーター – KBA88219 - Community Translated (JA)   Question: How can you use EZ-USB® FX2LP™ to make a USB-to-parall...
    SivaK_96
    last modified by SivaK_96
  • EZ-USB®FX2LP™を使用したUSB-パラレルコンバーター – KBA88219 - Community Translated (JA)

    Community Translated by NoTa_4591161         Version: **   Translation - English: USB-to-Parallel Converter Using EZ-USB® FX2LP™ – KBA88219   質問: どの...
    SivaK_96
    last modified by SivaK_96
  • Configuring CapSense Express devices through PSoC Designer 5.1

    Translation - Japanese: PSoC Designer 5.1によるCapSense Expressデバイスの設定 - Community Translated (JA)   Question: Can I configure CapSense Express devices through PSoC Designer 5.1   Answer: System level desi...
    GeethaP_31
    last modified by GeethaP_31