This project was submitted by @Balearicdynamics in the PSoC 6 and Wi-Fi/Bluetooth Connected Cloud Design Challenge on Element14 was one of the winners!

Home Automation Hub.jpg

 

 

Project Technology Focuses

  • PSoC® 6 Arm® Cortex®-M4 and Cortex-M0+ MCU
  • CYW4343W 802.11n Wi-Fi + Dual-Mode Bluetooth Radio
  • AWS IoT Cloud Services
  • SEGGER emWin

 

Project Requirements 

Hardware

 

Software

 

Project Description

This project implemented a full Home Automation Hub using PSoC 6, Cypress Wi-Fi/Bluetooth, as well as AWS IoT Services as the Connected Cloud Challenge required. The “PSoC 6 Control Center” as described in the project, aggregated multiple sensor nodes including: a door opener node, lighting node, alarm node, door bell node, etc. and then transmitted this sensor data to AWS SiteWise to build a scalable management system. SEGGER emWin was also used to drive a rich graphical display on the TFT Display Shield that comes with the PSoC 6 WiFi-BT Pioneer Kit to show different characteristics of the home.

home hub.PNG

 

 

Project Links

 

Resource List

 

Hardware:

 

Software:

 

AWS IoT Technical Resources