Skip navigation
Home > All Places > Topics > IoT Developer Zone > Blog > 2020 > June > 16
MatthewS_51

Smart Sump Pump

Posted by MatthewS_51 Jun 16, 2020

This project was submitted by @Cmelement14 in the PSoC 6 and Wi-Fi/Bluetooth Connected Cloud Challenge on Element14.

Smart Sump Pump.jpg

 

 

Project Technology Focuses

  • PSoC® 6 Arm® Cortex®-M4 and Cortex-M0+ MCU
  • CYW4343W 802.11n Wi-Fi + Dual-Mode Bluetooth Radio
  • AWS IoT Cloud Services

Project Requirements 

Hardware

Software

 

Project Description

This project implemented a Smart backup Sump Pump – essentially a device to remotely monitor water level in a basement. This project leveraged the PSoC 6 WiFi-BT Pioneer Kit to monitor Floor Water Sensors, and then transmit that data to AWS IoT Core where a text messaging system was setup to alert the user of water level getting to a certain level.

sump pump.PNG

 

Project Links

 

Resource List

Hardware:

 

Software:

AWS IoT Technical Resources

 

MatthewS_51

IoT Billboards

Posted by MatthewS_51 Jun 16, 2020

This project was submitted by @Sami9974 in the PSoC 6 and Wi-Fi/Bluetooth Connected Cloud Challenge on Element14.

IoT Billboards.jpg

 

 

Project Technology Focuses

  • PSoC® 6 Arm® Cortex®-M4 and Cortex-M0+ MCU
  • CYW4343W 802.11n Wi-Fi + Dual-Mode Bluetooth Radio
  • AWS IoT Cloud Services
  • SEGGER emWin

 

Project Requirements 

Hardware

Software

 

Project Description

This project implemented an IoT Billboard system – where users could “rent” an IoT Billboard through a website that the project creator built. That website interacts with a database based on PostgreSQL that stores user details, billboard images, payment details, and more. AWS IoT Core also interacted with this database and pulled these images that users were renting out. The PSoC 6 WiFi-BT Pioneer Kit would poll AWS IoT and pull down the images over MQTT, and displays the images for a certain amount of time on the TFT Display Shield that comes with the Pioneer Kit using the LCD BitMap converter for emWin.

 

iot billboards.PNG

 

 

 

Project Links

 

Resource List

Hardware:

 

Software:

 

AWS IoT Technical Resources

MatthewS_51

Home Automation Hub

Posted by MatthewS_51 Jun 16, 2020

This project was submitted by @Balearicdynamics in the PSoC 6 and Wi-Fi/Bluetooth Connected Cloud Design Challenge on Element14 was one of the winners!

Home Automation Hub.jpg

 

 

Project Technology Focuses

  • PSoC® 6 Arm® Cortex®-M4 and Cortex-M0+ MCU
  • CYW4343W 802.11n Wi-Fi + Dual-Mode Bluetooth Radio
  • AWS IoT Cloud Services
  • SEGGER emWin

 

Project Requirements 

Hardware

 

Software

 

Project Description

This project implemented a full Home Automation Hub using PSoC 6, Cypress Wi-Fi/Bluetooth, as well as AWS IoT Services as the Connected Cloud Challenge required. The “PSoC 6 Control Center” as described in the project, aggregated multiple sensor nodes including: a door opener node, lighting node, alarm node, door bell node, etc. and then transmitted this sensor data to AWS SiteWise to build a scalable management system. SEGGER emWin was also used to drive a rich graphical display on the TFT Display Shield that comes with the PSoC 6 WiFi-BT Pioneer Kit to show different characteristics of the home.

home hub.PNG

 

 

Project Links

 

Resource List

 

Hardware:

 

Software:

 

AWS IoT Technical Resources