This project is one of the lessons within an online Virtual Workshop hosted by Cypress and Mouser titled: IoT Design with Cypress PSoC® 6 MCUs and Wi-Fi/Bluetooth using Arm® Mbed™. This project particularly intends to create a small Smart Thermostat prototype – leveraging the PSoC 6 WiFi-BT Pioneer Kit. An ADI temperature sensor is connected to the kit with temperature data processed on PSoC 6. That data is then transmitted to AWS IoT Cloud and also displayed on the TFT Display Shield that comes with the Pioneer Kit. Temperatuer is recorded along with a set point, current time, and thermostat “mode” (Warm, Cool, etc).