Skip navigation
Home > All Places > Software Forums > WICED Studio Wi-Fi/Combo > WICED Studio Wi-Fi/Combo Forums > Blog > 2015 > January > 02

WICED SDK could be connected to the STM32Fx-Discovery board (in this case STM32F4-Discovery board is used) with JTAG debugger.

 

Connect the JTAG debugger to the STM32F4-Discovery board using the following connections.

ScreenHunter_105 Jan. 02 22.49.jpg

To build an application and run it on the target STM32F4-Discovery board add the following to the Make Target built command:

     For Olimex:     JTAG=Olimex_ARM-USB-TINY-H

     For Segger:     JTAG=jlink

 

     <WicedApplication>-<YourPlatform> JTAG=Olimex_ARM-USB-TINY-H download run

 

For sample interface of interfacing SN8000 WiFi module to the STM32F4-Discovery board please check out this link SN8000 WiFi Module with STM Discovery Board.

Here is an example of interfacing the BCM43362 based SN8000 WiFi module (from Murata) with STM32F4-Discovery board (with STM32F407 MCU).

 

The schematic below illustrates the connections required to connect the SN8000 to the STM32F4-Discovery board. Since the SN8000 comes as a module to connect to a PCB, a carrier board is needed to connect the module to the STM32F4-Discovery board.

ScreenHunter_95 Jan. 02 16.15.jpg

 

If you have the SN8000 module mounted on a SDIO carrier board, which comes with the SN800 evaluation board, the following connection schema can be used to connect the module to the STM32F4-Discovery board.

ScreenHunter_97 Jan. 02 16.19.jpg

 

For terminal interface between the STM32F4-Discovery board and host PC the following serial (RS232) connection is needed.

To connect a JTAG debugger (Olimex_ARM-USB-TINY-H) to the STM32F4-Discovery board follow the below connection.

For more information please take a look at this link: Interfacing STM32Fx-Discovery with WICED using JTAG Debugger

 

After setting up the hardware connections WICED SDK-3.x should be updated to run WICED applications on STM32F4-Discovery board with SN8000 WiFi module. Unzip the attached file with the following expected updates.

 

The STM32F407 directory goes to .../WICED/platform/MCU/STM32F4xx/GCC directory of the WICED SDK.

 

The STDiscovery407_BCM43362 platform files goes to .../platforms directory of the WICED SDK.

ScreenHunter_104 Jan. 02 22.35.jpg

 

To build and run application using WICED SDK following Make Target could be used;

     <Application>-STDiscovery407_BCM43362 JTAG=Olimex_ARM-USB-TINY-H download run

 

To build and run a sample scan app use the following Make Target:

     snip.scan-STDiscovery407_BCM43362-debug JTAG=Olimex_ARM-USB-TINY-H download run

Filter Blog

By date:
By tag: