• TAG3 Serial Flash Configuration

    This BLOG is a short introduction for configuring the TAG3 board for use with the Serial FLASH. This information is taken from our TAG3 document Manual :  The specified item was not found. and our Quick Start Gu...
    jota_1939431
    last modified by jota_1939431
  • How to Import a New SDK into an Existing WICED Smart IDE

    Once you have the WICED Smart IDE installed you can import other WICED Smart SDK .7z releases easily without reinstalling the IDE, or even changing the workspace. This method comes in handy when you have several relea...
    JaeyoungY_71
    last modified by JaeyoungY_71
  • Service Changed Characteristic

    The beginning of every GATT database (GATTDB) within the SDK begins the comment:         // Service change characteristic is optional and is not present   What is the service change ...
    JacobT_81
    last modified by JacobT_81
  • Number of packets sent in a connection interval in BLE and Throughput

    The maximum LL PDU (Packet Data Unit) for BLE 4.1 is 27 Bytes. In these 27 Bytes, the actual data that is transferred as a GATT Write or Notification can be upto 20 bytes, excluding the L2CAP header, Data PDU Header a...
    madhul_36
    last modified by madhul_36
  • WICED Smart SDK 2.x Smart Designer Tool Overview

    Revision Change Decription Date 1.0 Initial Video - No Audio - 6 minutes 06/23/14 1.1 Added Audio 06/24/14 1.2 Added detailed Smart Designer video - Uses Microbrewery and Beer Drone as Services and Characteristics ex...
    jota_1939431
    last modified by jota_1939431
  • CYW20706 – BLE Secure Data Hub

    Objective This example demonstrates the implementation of different security levels of pairing and the data transfer in a multi-connection environment.     OverviewThis project instantiates a data hub that ...
    MichaelF_56
    created by MichaelF_56
  • CYW20706 – BLE Low Power Beacon

    OverviewThe project demonstrates a BLE Beacon with battery monitoring, low power operation and power save functionalities.   Requirements            ...
    MichaelF_56
    created by MichaelF_56
  • LED with PWM

    Hello, here is how you can turn on an LED using PWM. Include Library #include "pwm.h" #include "gpiodriver.h" Define Macros #define LED_RED    26  /* PWM 0 */ #define LED_BLUE   27...
    userc_19497
    last modified by userc_19497
  • Sample BCM20732S PCB Layout

    Hello Community Members,   This BLOG should be used as a "guide" for creating the PCB Layout for the BCM20732S Module.   The first attachments are: BCM20732S_GERBER.zip - The gerbers of a sample layout. ...
    jota_1939431
    last modified by jota_1939431
  • Leveraging TAG4 to better understand the WICED Smart Programming Environment

    ****************************************************************************************************** Tag 4 Specific Information **************************************************************************************...
    JacobT_81
    last modified by JacobT_81
  • Tag 4 Platform Specific Hardware Information

    Back to main page: Leveraging TAG4 to better understand the WICED Smart Programming Environment     Formal Tag4 Documentation: Hardware User Guide (SDK 2.x and TAG4 Board) WICED Smart Quick Start Guide (...
    JacobT_81
    last modified by JacobT_81
  • Tag 4 Platform Driver and Demo

    Back to main page: Leveraging TAG4 to better understand the WICED Smart Programming Environment     The Tag4 platform driver can be downloaded below.   Tag 4 Quick Demo Setup:     ...
    JacobT_81
    last modified by JacobT_81
  • Adding and removing master nodes to a whitelist running on a peripheral device

    This blog is designed to demonstrate how to add and remove peripheral devices from the White List using hello_sensor and hello_client. We will use 2 TAG03 boards, but you can use 2 or more.   We will show you h...
    abuch
    last modified by abuch
  • Connection Parameter Update Requests

    What are connection parameters?   There are three parameters that define a connection.   Connection Interval: the connection interval is the time between connection events. When in connection a central pi...
    JacobT_81
    last modified by JacobT_81
  • Changing the Bluetooth MAC Address

    The ble_addr_toggle snippet application demonstrates how to change the Bluetooth MAC address. The app starts advertising with the default MAC address on the board. Pressing the user button on the WICED eval board will...
    MichaelF_56
    created by MichaelF_56
  • BIG RESTful Smart Server Notify/Indicate Features

    <Notify/Indicate Features> We have new notify/indicate features implemented in the BIG Smart Server that will be included in the next release. In this guide we will how you how to get notifications/indications u...
    MichaelF_56
    created by MichaelF_56
  • Troubleshooting on BLE Pairing with Mobile Devices

    This is a troubleshoot guide that deals with issues on BLE devices 20737(TAG4) and WICED Sense using WICED Smart hello_client.   <1. Problems pairing with mobile device in hello_client>  In order to p...
    JaeyoungY_71
    last modified by JaeyoungY_71
  • SOTAFU for Android and iOS

    Revision Change Description Date 1.0 Initial Draft - VR 09/30/14 - 8:45PM 2.0 Android and iOS Implementation 05/27/15 - 5:00PM     The SDK 2.1.1 provides a Secure OTA Firmware update.   Wiced smart mem...
    kwang
    last modified by kwang
  • User Defined String for CHAR_DESCRIPTOR_UUID16

    To write a user defined string for CHAR_DESCRIPTOR_UUID16, you need to do the following.   1. Add a char description and make the permission readable in wiced_bt_gatt_db.c CHAR_DESCRIPTOR_UUID16(USER_DESCRIPTOR, ...
    MichaelF_56
    created by MichaelF_56
  • Using Notifications in BLE Peripheral Mode

    In order to use notifications in BLE peripheral mode, you will need to define the CCCD in the GATT database and send the notifications or indications according to the value the client sets it. I attached a zip file th...
    MichaelF_56
    created by MichaelF_56