• Where is classic bluetooth mouse or keyboard example?

    Hi, I use cyw20719. Where is classic bluetooth mouse or keyboard example?   Please tell me.
    last modified by ShYa_3209881
  • Selection of ADC reference as bandgap vs. Vref, and voltage value of bandgap reference

    Hi,     I am trying to use the ADC but I need to understand how to adjust the reference for the ADC.   I see in the BCM20736 Data Sheet (20736-DS-102-R) on Page 13: "• There is a built-...
    last modified by userc_22169
  • FW Update without External Memory

    I am trying to get to grips with the FW update process for the SDK, i have been using the uart_firmware_upgrade as a reference, but i am struggling to understand the following:   Is it possible to update the FW ...
    last modified by JaHo_4675726
  • Scan sometimes stops working (continued)

    Per the thread here: Scan sometimes stops working (continued)   I'm getting the similar issue on SDK2.1.1 on 20736.  What is the correct procedure to kick off a scan?   I'm doing the following  ...
    last modified by userc_13905
  • "Windows error 2" when attempting install of WICED-Smart-SDK-2.2.1-IDE-Installer on Windows 7

    I am attempting installation on Windows 7, and have made multiple attempts with the same error.   I download and run the exe, but only get as far as LaunchAnywhere going through the initial process as you can se...
    last modified by userc_22169
  • WICED Smart IDE  (SDK 2.2.2) launch error on MacOs

    Hi,   I have a fresh install of the Wiced Smart SDK version 2.2.2 but I am unable to launch the IDE after the install and get a Framework Event error: Is this related to eclipse version bundled with the SDK bein...
    last modified by akdac_3659086
  • Eclipse IDE compilation errors

    Upon downloading and installing the windows version of the WICED Smart SDK, I can compile without errors by selecting a target.  But the Eclipse IDE seems to be using a different compiler, and gives me a bunch of...
    last modified by reynald
  • Using CYBLE0130025 Eval board in Binary Mode

    Hi,   I am trying to use CYBLE_0130025 Eval board to learn EZ Serial Binary command mode.   I have kept Switch 1-4 in OFF position and Switch 5-6 ON Position.   I am using Realterm to see if after se...
    last modified by PrSh_3615356
  • CYW20737S advertisement current drawing estimation?

    Hello,   I'm developing a device run on coin cell battery with CYW20737S. I've managed to set lowest TX power -20dBm, advertisement interval: high 100ms for 5 sec, low 640ms for 5 sec. Now I would like to esti...
    last modified by nahuc_1617156
  • Can I use cyw20737 to develop mesh application?

    Hi cypress     Can I use cyw20737 to develop mesh application ?
    last modified by nelic_2278401
  • HW Timer in 2073x

    Hi,   As a continuation of this discussion: HW Timer in 2073x Could you possibly tell me how big is the counter of HW timer? Please let me know if I should create new discussion. Thanks, Wataru
    last modified by WaSu_1697556
  • can I create virtual com-port from bcm20737 (like modem com-port NOKIA5230)?

    Hello. Some mobile phone (Nokia 5230) have possibility emulate virtual com-port (in Windows) after connection to PC via bluetooth;usually this com-port use like  modem I have to developed bluetooth device (bcm207...
    last modified by albec_3224396
  • Android connection and disconnection strange behaviour

    Hi to everyone,             Last weeks I've been working on the connection between the bcm20737 and my custom Android app.     For my application I don't need bonding neither ...
    last modified by AnSo_2111241
  • bleprofile_WriteNVRAM Problem

    Hi guys,   I'm working with a bcm20737 module and lately I'm facing the next problem: I found that sometimes the bleprofile_WriteNVRAM failed writing in some vsID. I found a solution, reading the same vsID afte...
    last modified by AnSo_2111241
  • 20737 keep button(ing) causes system reset !!!!

    we use Cypress 20737 SOC and based on hello-sensor for ur application in some sensor query and calculation at timer thread (1sec-base).   However, we suddenly find that if user keeps pressing button without sto...
    last modified by lesuc_2256931
  • Perl installation issue with SDK2.2.3 - OSX Sierra (10.12.6)

    Hello,   I am upgrading the installation from WICED Smart SDK2.2.2 to 2.2.3. Compiling a sample code gives me the following:   dyld: Library not loaded: /System/Library/Perl/5.12/darwin-thread-multi-2level...
    last modified by MiTo_1583836
  • Number of packets sent in a connection interval in BLE and Throughput

    The maximum LL PDU (Packet Data Unit) for BLE 4.1 is 27 Bytes. In these 27 Bytes, the actual data that is transferred as a GATT Write or Notification can be upto 20 bytes, excluding the L2CAP header, Data PDU Header a...
    last modified by madhul_36
  • Is there a document tell about what SPAR is and patch is?

    Hi Helpers:   I am a newbie in this area, and downloaded Wiced Smart SDK, but by reading documents, seems I didn't find the answer: what SPAR is and patch is? Appreciate your answer.   Regards, Aaron
    last modified by userc_25068
  • Problem with OTA Android

    Hi everyone, As the title says, I have a problem with OTA. Just for testing it, I took the sample app you can find here  https://community.cypress.com/servlet/JiveServlet/download/9499-5157/OTA_Android_Sample_No...
    last modified by user_2161731
  • How many 'bleprofile_sendWriteCmd' can be queued up?

    I'm currently working on an application with a 20736S acting as a central.  In order to speed up the overall process, I'm interested in using 'bleprofile_sendWriteCmd' since it doesn't require waiting for a respo...
    last modified by dasmc_2125571