Microcontrollers Forum Discussions
Browse the Community
PSoC™ 6
Discussion forum regarding PSoC™ 6 - 32-bit Arm Microcontroller (MCU) Forum, discusses the 40-nm technology - best combination of ultra-low-power consumption, flexibility, security and high-performance topics.
PSoC™ 4
PSoC™ 4 - Arm®-based Forum, discusses the low-power Cortex®-M0 and Cortex®-M0+ cores, CapSense®, and Bluetooth® Low Energy
PSoC™ 5, 3 & 1
The PSoC™ 5LP, PSoC 2 and PSoC 1 Forum discusses - 24-bit Digital Filter Block (DFB), 24 UDBs, DMA controller and integrating AFE, digital logic with user interface ICs with an Arm Cortex-M3 CPU solutions.
CAPSENSE™ & MagSense
The Sensing Technology Forum discusses CAPSENSE™ - capacitive-sensing and MagSense inductive-sensing for consumer, industrial, automotive, and Internet of Things (IoT) applications.
XMC™
AURIX™
In this forum you can post your questions, comments and feedback about the 32-bit AURIX™ TriCore™ Microcontroller. The AURIX™ offers the highest scalability in performance, memory & peripherals across application. It is a safe and secure companion chip, meeting both the ISO functional safety standards and EVITA full security standards. Here you can also find the links to the latest board pages, SW and Tools GitHub, trainings, documents and FAQs
TRAVEO™ T2G
Discussion forum regarding 32-bit TRAVEO™ T2G Microcontroller - based on ARM® for automotive body electronics applications; cutting-edge performance, safety, and security features topics.
MOTIX™ MCU
The MOTIX™ MCU forum is designed for you to post your questions, comments and feedback about the famous Embedded Power ICs at anytime. Ask your technical questions or explore existing content!
Legacy microcontrollers
Featured Discussions
Hello Team,
I walk through the TC375XX tricore infineon Micro safety manual, I see lot of internal and external software and hardware safety mechanisms.
My understanding is that the Internal and external safety mechanisms would be implemented and prevented against the safety Goal. I would like to know what the MCU safety Goal are or is there any Assumptions of use case considered? please clarify.
Regards,
Nallusamy
Dear Forum:
I do many test, I find the following phenomenon:
Before set MCU to Deep Sleep,
If I don't clear the SSR(serial status register) bit before close SPI,
MCU(PSoC6) can't enter deepsleep.
If I clear the SSR(serial status register) bit before close SPI,
MCU(PSoC6) can enter deepsleep.
I want to confirm:
does the SPI SSR bit affect MCU deepsleep or not.
Thank you.
Show LessThanks for anyone who access my problem. How can Mulitcore access same variable in the same time When using Tricore TC389 with Hightec IDE?
I had put memset() in core0,core1,core2,core3's while(1), to set an large array to diffrent content. There is nothing error or unexcept happen. I just can see the var jump between different number, Dose infineon did some basework in tricore? Is this a safety way to access variables in multicore ?
Do you have any manual to explane this questions? Please give me a demo that show how to access variables in multicore in safety way.
Show Lesshi
could anyone tell me if the LMU data will be reset after Mcu was reset by TC35584?
or which memory area can keep unchanged after reset by 35584 apart from the NVM(DF and HSM ...) ?
Show Less
Hello,
I am developing a program that executes the XMC Flasher .exe, and programs a board using said flasher.
However, I would like to be able to program/set BMI of multiple boards at the same time by having multiple programmers connected into my PC. If multiple XMC programmers are connected to my PC at once, is there a way to identify, select, and control a specific programmer, perhaps through the programmer's COM port or serial number?
If not possible through XMC Flasher, is there is other software that would accomplish what I'm trying to do?
Thank you,
Alex
Show Less大家好。
TLE9879开发板,官方自带程序,调节速度使用电位器设定,电机能够正常工作。但是如果设定一个固定转速,比如Emo_SetRefSpeed(1000 ),那么电机启动的时候,需要用手转一下,电机才能够正常启动运转,否则就不转动。
已经试着调试过启动占空比,给定的速度,以及PID参数,都不管用。
问下能够得到指点一下,感谢!
Show Lesshi,Experts
I accidentally clicked “Solved” on the previous post,There is still this issue,Please help!
When I was debugging the two channel ASCLIN serial ports, I found that sometimes (with a high probability) when 275 ASCLIN receives data, the data length and received data may be messy, as shown in the following figure。
My software's purpose is to receive 8 bytes, then check the correctness of the data, and then return some data。
ASC_INIT ,the initialization function is shown in the following figure。
On the hardware side, I measured the waveforms when receiving correctly and when receiving incorrectly, and compared them to see that the waveforms are the same。May I ask where the problem is with the software?
best wishes
Show LessHi Infineon.
Below is sample code for DFU(device firmware upgrade).
https://github.com/Infineon/mtb-example-psoc4-dfu-basic
This sample code explains DFU using I2C or UART.
Is there any sample code for DFU using SPI?
Is my understand correct that PSoC4 can use SPI for DFU?
Or can only I2C or UART be used in DFU and not use SPI?
Best Regards.
YuMa
Show Less-
TraveoII
UART buadrate Setting
by chandan1995 Jun 19, 2023