to follow, share, and participate in this community.
Hi, I've ported the famous dhrystone ! benchmark to WICED. The only thing I still miss is a way to use -O3 as CFLAGS instead of -Os, actually I'm editing build/dhrystone-NoOS-NoNS-BCM943364WCD1/config.mk by ... Hi, I am measuring the RF power out of the Broadcom reference design bcm943341_3. The 2G power is 22dBm but in the 5G mode, the power out is only 11dBm. Has anyone seen this before? Data sheet of the part said it sh... Is it possible to use the BMC943341 with dual band wifi and with BLE? If so, how? and how is the switching of the antenna signal handled? How can I reduce the power consumption of a BCM94334x module while it is in advertising mode? My ISM43340 module (on an intentek EVB) draws around 40mA while advertising (for example, when running the ble_proxim... Hi. I am using the ISM43341_L77 which is a radio+ARM module without an EVB, as I have to finalize the layout of this module on our custom main board. With JTAG flashing using Olimex, I can successfully... Hi In SDK 3.1.2 I can use the function wiced_framework_reboot() to perform a soft-reset of the processor on the Inventek EVB ISM43362_M3G_L44. But I can't perform a soft-reset of the processor on o... Hi, I am now using ISM43340-M4G-EVB & programming the same using WICED sdk 3.1.2 through USB-UART port. But, I am facing programming issue( I can see no program error ,success message & reset message i... Hi, Does WICED sdk 3.3.1 support ISM43341/40 eval kit ? Inventek has released patch for sdk 3.1.2. Can that patch be used in sdk 3.3.1 ? Need reply ASAP. I don't know why but I can't seem to find a distributor of ISM43340 EVB. None of them Distribution | Inventek Systems seem to be selling it online. Does anyone know where I can order a couple of boards? Hi, I am trying to build a snip/scan application using eclipse IDE provided in the wiced SDK. This platform is not defined under platforms directory in the SDK. So I copied the target for 43362... Hi. I have an inventek board and a broadcom WICED SDK 3.3.1. I have patched the 3.1.2 patch from Inventek (unless there is one for 3.3.1 that I can try). I wish to try the BLE proximity on the Inventek ISM4334... Building a snip for the ISM43362_M3G_L44 requires the use of a patch from Inventek to be applied to the SDK. Do you know if the patch used for the 3.1.2 SDK will work on 3.3.1? http://www.inventeksys.com/wp-content/uploads/Wiced3.1.2patch.zip
Get a feed of this content