• Reduce Audible Noise from SMPS Inductor – KBA226199

    Author: yukinorim_01          Version: **   The switching frequency of currently available SMPS is generally over the 100-kHz range, so the switching frequency in normal PW...
    ChaitanyaV_61
    last modified by ChaitanyaV_61
  • TRPG and TPPG of PG Block in S6BP20x - KBA226696

    Author: SadaharuK_26           Version: **   Question: What are TRPG and TPPG of the PG block in S6BP20x family datasheet?   Answer: The Fig.1 shows the timing...
    ChaitanyaV_61
    last modified by ChaitanyaV_61
  • VCC Connection of S6BP201A, S6BP202A, and S6BP203A – KBA225465

    Author: jingw_51           Version: ** Question: Can the VCC pin of S6BP201A, S6BP202A, and S6BP203A be used to power an external load?       ...
    ChaitanyaV_61
    last modified by ChaitanyaV_61
  • Effect of Heat from Peripheral Components on S6BP501A/S6BP502A – KBA227567

    Author: yukinorim_01            Version: **   Changes in peripheral components has negligible effect on the heat generated by S6BP501A/S6BP502A. Several factor...
    ChaitanyaV_61
    last modified by ChaitanyaV_61
  • Auto PWM / PFM Mode of S6BP501A and S6BP502A – KBA224577

    Author:  yukinorim_01  Version: **   Question: What is Auto PWM / PFM mode of S6BP501A and S6BP502A?   Answer: Auto PWM / PFM mode is an operation mechanism where S6BP501A and S6BP502A automatical...
    ChaitanyaV_61
    last modified by ChaitanyaV_61
  • S6BP501A/502A Pin Connection when Not Using DD1V Power Rail - KBA224528

    Author: RinoS_61    Version: **   Question: How to connect the pins when not using the DD1V power rail of S6BP501A/502A?   Answer: When not using the DD1V power rail of S6BP501A/502A, DD1V bl...
    ChaitanyaV_61
    last modified by ChaitanyaV_61
  • Thermal Resistance θJA of Cypress’ Automotive PMICs – KBA224663

    Author: jingw_51       Version: **   Question: What are the thermal resistances of S6BP20XA series, S6BP50XA series, and S6BP401A?   Answer: Thermal resistances of S6BP201A, S6BP202A...
    ChaitanyaV_61
    last modified by ChaitanyaV_61
  • PFM Switching Behavior of the DD5V Channel in S6BP50x PMIC – KBA227373

    Author: SadaharuK_26          Version: **   The simplified equivalent block diagram of DD5V channel in S6BP50x PMIC is shown in Fig. 1. When you set the PWM/PFM switc...
    ChaitanyaV_61
    last modified by ChaitanyaV_61
  • SBD Selection for S6BP501A and S6BP502A – KBA224896

    Author: AtsushiT_61           Version: **   Question: How can I select Schottky Barrier Diode (SBD) for S6BP501A and S6BP502A?   Answer:   The required ...
    PraveenM_86
    last modified by PraveenM_86
  • Land Patterns for Analog Automotive PMIC – KBA225484

    Author: AtsushiT_61           Version: **   Question: Do you have a recommended land pattern for Analog Automotive PMICs?   Answer: Figure 1 through Figure 3...
    PraveenM_86
    last modified by PraveenM_86
  • TPPG Condition in S6BP401A Datasheet - KBA226545

    Author: AtsushiT_61           Version: **   Table1 shows electrical characteristics example of the power good monitor function of S6BP401A, and Fig.1 shows the t...
    PraveenM_86
    last modified by PraveenM_86
  • Increasing S6BP202A Rated Output Current under Low Input Voltage Condition – KBA226161

    Author: AtsushiT_61           Version: **   Question: How can the rated output current of S6BP202A be increased under low input voltage condition?   Answer: ...
    PraveenM_86
    last modified by PraveenM_86
  • Current-Mode Architecture in Cypress Automotive PMIC – KBA225717

    Author: AtsushiT_61           Version: **   As shown in Figure. 1, current mode control uses an inductor current feedback loop in addition to the voltage feedback...
    PraveenM_86
    last modified by PraveenM_86
  • AC Rating of LX5V Pin of S6BP501A and S6BP502A - KBA227095

    Author: AtsushiT_61           Version: **   Question: What is the AC rating of LX5V pin of S6BP501A and S6BP502A?   Answer: Figure 1 shows an example of the...
    PraveenM_86
    last modified by PraveenM_86
  • Meaning of Legacy Analog Part Numbers – KBA219616

    Version: *B   Question: What is the meaning of each segment in the full part number of legacy analog products?   Answer: The meaning of each segment is listed in Table 1, using the MB3771PF-G-BND-JN-ERE1...
    chaitanyav_41
    last modified by chaitanyav_41
  • Using S6BP203A for 4G Module Power – KBA220671

    Version: *A   Question: Can the S6BP203A output 3.8 V for powering a 4G module?   Answer: 4G remote wireless communication module is included in the Telematics Box (T-Box) application. Many 4G modules requ...
    chaitanyav_41
    last modified by chaitanyav_41
  • Need for SBD in S6BP501A and S6BP502A–KBA223619

    Version: **   Question: Can the Schottky Barrier Diode (SBD) be omitted to reduce bill of materials (BOM) cost when designing a power management system using S6BP501A or S6BP502A?   Answer: No. When VOUT5 re...
    chaitanyav_41
    last modified by chaitanyav_41
  • S6BP401A Maximum Output Current During Soft-start – KBA223406

    Version: **   Question: Does the S6BP401A maximum output current during soft-start differ from that in normal operation state?   Answer: For the DCDC channels (DD1~DD4), the maximum output current during sof...
    YuxianL_01
    last modified by YuxianL_01
  • Suppressing Input Ripple RMS Voltage on S6BP401A – KBA223220

    Version: **   Question: How does S6BP401A suppress the input ripple RMS voltage?   Answer: Generally, additional input ceramic capacitors are often used to reduce ripple input RMS voltage. However, doing so ...
    chaitanyav_41
    last modified by chaitanyav_41
  • ESD Level for ANALOG PMIC - KBA222063

    Version: **   Question: What is the ESD acceptance level of PMIC devices?   Answer: The ESD acceptance level of each PMIC devices are referred below. S6AP412A     Measured Value N ESD MM ...
    chaitanyav_41
    last modified by chaitanyav_41