to follow, share, and participate in this community.
Version: *A Question: How do I program a Cypress device with KitProg2/MiniProg3 by using the LabVIEW software from National Instruments? Answer: LabVIEW supports the ActiveX method to access the Co... Community Translated by MoTa_728816 Version : ** 質問: UART における オーバーランエラーとはどういったものですか？ また、どのような対策が必要ですか？ 回答: オーバーランエラーは直前の1バイトが UART の受信バッファか... Community Translated by MoTa_728816 Version : ** 質問： ADCでの、INLとDNLの意味を教えてください。 回答： DNL - 微分非直線性誤差 (Differential Non-Linearity): 理想的なADCの出力は、幅を持った... Version: ** Question: What should I consider if my system is experiencing voltage irregularities? Answer: It depends; some you can ignore, while for some you need to do Power-On Reset (POR) or an a... Version: *B Question: What is Cypress Commercial and Government Entity Code or CAGE CODE? Answer: The Commercial and Government Entity Code, or CAGE Code, is a unique identifier assigned to supplie... Version: ** Question: When bit-banding is used to access a bit in peripheral registers, which access size (a byte, a half-word or a word) can be used for the bit-banding access? Answer: The bit... Version: ** Question: When using the USB function, can we select the built-in high-speed CR for the master clock? Answer: No. The high-speed CR clock (CLKHC) frequency accuracy does not meet the... Version: ** Question: The Dstc_ClearDreqenbBit() function in Peripheral Driver Library (PDL) 2.1.0 sets the DREQENB register bit instead of clearing it. The problem is reproducible on the FM0+ and FM4 family o... Version: ** Question: Selecting analog input channels 8 through 15, and 24 through 31 for ADC conversion is not supported due to a defect in the ADC driver. The problem is reproducible on FM0+ and FM4 family o...
Get a feed of this content